background image

Install Auracle X and upgrade your PlayAUDIO1U Firmware

Before you begin using your PlayAUDIO1U, we recommend that you upgrade your unit's firmware to the latest version using iConnectivity's Auracle
for X application. Follow these steps to install the Auracle X software and perform the firmware upgrade:

1. Download the latest version (2.0.0) of the Auracle X software installer.

a. Navigate to

https://www.iconnectivity.com/playaudio1u

and follow the instructions for downloading the Auracle X software installer

specific to your computer.

b. Connect your to the USB DAW port A on the front panel of your PlayAUDIO1U unit.

2. Launch the iConnectivity Auracle X installer file. Connect your computer to the internet. Then, with your computer connected to the

PlayAUDIO1U, double-click the iConnectivity Auracle X installer.

3. Accept the firmware upgrade if your unit detects that newer firmware is available. The Auracle X software will prompt you to upgrade if a

newer firmware version is available. Verify that your device is connected to USB DAW port A and click Yes to continue with the upgrade. An

Upgrade Complete prompt will appear when the process completes, at which point Auracle X's Device Info page will refresh with your

PlayAUDIO1U's device statistics.

User Guide v2023-001

10

Summary of Contents for PlayAUDIO 1U






















Reviews: