10
Attention:
We recommend always keeping the system locked while the machine is used the conventional way, by slightly tightening
the lock screw (10).
When using the rotary system with heating on both faces of the blank, place the model after the whole heating process
of the blank is completed on both faces, since the rotation of the rotary ring may hit the model, damaging it.
5.2.1 - After releasing the rotary system lock, follow the steps according to the conventional vacuum forming described
above to 5.1.8, until this phase one side of the plate is heated.
5.2.2 - To heat the other side of the blank, rotate the heating unit completely (180°) to the left by means of the handle
(01) (photo 20).
Only then rotate the larger ring 180º counter-clockwise using its respective handle (photo 21) until you hear a click, thus
exposing the other side of the plate upwards (photo 22 and 23), return the heating unit (02) to the central position and
wait until the face of the blank is heated.
Photo 20
Photo 19
Photo 21
Photo 22
Photo 23
