ICONE X7, Instruction Manual For Use

Page: 85 / 96

Charging without removing the battery
1. Fold the central part of the bike, use the key to unlock the battery and remove the
equipment between the battery and the body and slowly remove the lithium battery.
2. Insert the charging plug of the battery charger into the charging socket of the battery and
start charging. The battery charge indicator is now displayed in
Red .
3. After the battery charge indicator changes to Green , it means that the battery is fully
charged. It takes approximately 6.5 hours from exhausted conditions to full battery condition.
Charging with battery disassembly
1. Open the power system cover on the left side of the bike, you will see the battery charging
socket.
2. Insert the charging plug of the battery charger into the charging socket of the battery.
Connect the power plug of the battery charger to the specified voltage socket.
3. The charger indicator is now displayed in
Red .
4. After the charger indicator has turned Green , it means that the battery has been fully
charged. It takes about 3-8 hours from the exhausted state to the full state of the battery.
WARNING! It is recommended to follow the instructions in the indicated sequence and
NEVER invert the phases in order to avoid battery short circuits.