iconBIT Toucan W Quick Start Guide
Русский
6
Comments on equipment repairs:
- It is forbidden for users to modify the design of the device. Do not disassemble the player. In
case of device breakdown due to self-performed repairs or modification, no warranty service
will be provided.
- Should any malfunction appear, the device must be taken to an authorized service centre,
where personnel will perform diagnostics and repair.
Do not dispose the device. The product is recyclable. Utilization
requirements should be met. In some countries utilization of
electronic devices is in the scope of specialized guidelines;
please refer to relevant local organizations for additional
information.
1.5. Connection
Output device check
1. LCD: Check the max resolution of LCD, you can inquire its’ user manual.
2. CRT: The max resolution is 576p, check if there is YPbPr input.
3. Check your home theater system supports HDMI 1.3 input or not. HD audio can be passed by
HDMI cable.
1.5.1. TV Connection
1. Connect Toucan W to TV by HDMI cable.
Connect Toucan W to HDMI input of LCD or projector, plug the power adapter into DC IN port.
Turn on your TV, switch it to HDMI mode, power on Toucan W, and it will go to main screen after
10 seconds.
2. Connect Toucan W to TV by YPbPr.
Connect Toucan W to CRT, YPbPr is recommended. Connect red, green and blue cables to YPbPr
input of CRT, and connect the other end to YPbPr output of Toucan W. Audio cables (red and
white) need to be connected as well.
Turn on your TV, switch it to YPbPr mode, power on Toucan W, and it will show main screen after
10 seconds.
1.5.2. Network Connection
Toucan W provides two network connections: cable network and inside wireless network.
There is a USB wireless card inside Toucan W.
You only need to set up network for one time, it will connect to internet automatically when you
use it next time.
