iconBIT HDB700LED
5
Inserting Memory Card
The Reader supports SD/SDHC/MMC card. To insert a
Memory card:
Open the SD cover.
Check that the SD card is in the correct position with
the contact pin facing upwards as illustrated below.
You may damage the card and the reader if SD card
is not inserted in correct position.
Push the SD card into the card slot until it clicks.
To remove SD card, push the SD card once again
until it clicks.
When a SD card is inserted in or ejected from the
reader, it may take few seconds for the reader to
update the content.
Please avoid inserting or ejecting SD card when
other operation is running as this may cause the
system hang.
Do Not remove the card if the content inside the card
is being played. This will halt the operation of the
reader and cause the reader to restart.
If the system is not responding, press and hold the
<Power> button for 6 seconds to reset and turn it off.
