13
Windows driver installation
Please follow the step-by-step procedures below to install your Umix 1010 Rack
USB recording interface and its driver.
1. Turn on your computer
Note:
Do not connect the Umix 1010 Rack digital audio interface to your
computer yet
2. Insert the Driver CD into your CD-
Rom.
After you have inserted the provided Driver
CD into your CD-Rom, an Installation screen
should appear as shown in Diagram 12, then
click "Windows Driver” for the driver installation"
Note:
If the Installation screen do not appaer
automatically. Go to the CD folder and double
click "Setup"
3. Installation Wizard appear
Choose "Next" when you see the Welcome
Screen as Diagram 13 shown
4. License Agreement
Check mark the “I accept the terms in the
License Agreement” and click “Next”.
Diagram 13
Diagram 14
Diagram 12
