ICON truflo TKP Series, Quick Start Operating Manual

Page: 6 / 12

Getting Started
NPN Pulse Output
To
Change
Value
OPERATION DISPLAY
STEPS
Step-1
Programming Flow Rate
Pulse Output
Home Screen
Press Key
Step-2
Programming Flow total
Pulse Output
Press Key
Press Key
Step-3
Return to Home Sereen
Press Key
Step-4
Home Screen
CV Display Reads 0
SV Display Reads 0
0 Totalizer Default
0.0 Flow Rate Default
CV = Current Value
SV = Programmed Value
1000 Default
One Pulse Per Gallon
Default
(Flow Rate) Pulse
Program Value of (Flow Rate) Pulse (NPN) Output
Preset Value of Flow Rate
CV
SV
CV > SV Flow Rate Pulse Output ON
CV < SV Flow Rate Pulse Output OFF
Change to a Value that meets your Flow Rate Pulse Output
2000 Factory Default
One Pulse Per Gallon
Default
Program Value of Flow Totalizer Pulse (NPN) Output
SV : Preset value of Flow Total
2000 Default this can be Changed to Desired Value Refer to Next Page Programming OP2 Output for Options for Totalizer
Flow Totalizer Pulse | Step #2-Next
CV
SV CV > SV Flow Rate output ON
Return to Home Screen
0 Totalizer Default
0.0 Flow Rate Default
Press SET to Save and Proceed to the Next Screen
Press SET Button to Save and Proceed to Next Screen
Steps Only Necessary If NPN Pulse Output is Required
Op1 & Op2 = 150mA Max Switching Currency
C Consumption is 60mA Max.
CV = Current Value = Current Flow Rate on Display
SV = Selected Value (Programmed Value Customer Entered)
NPN Pulse is a Transistor
Step-5 For Programming 4-20mA Analog Output
TKM (4-20mA) and TKP with (RS 485 Option) Only
F
SET
(Together)
OPERATION DISPLAY STEPS
Home Screen
Press + Key 3 sec
Step-1
Programming of Lock
Out Feature
Press Key
Step-2
Programming
Units of Flow
Press Key
Step-3
Coefficient of
Flow Volume
Press Key
Step-4
No Programming
Required
Program Range of Transmitter
TKM Model Only
Press Key
Step-5
Power On Flow Meter with DC Power
Display will Show
0 Totalizer (Top RED )
0 Flow Rate (Bottom GREEN )
Programming Lock Out Feature
Lck = 10 (Unlocked) : Factory Default, IF Lck is Changed from the # 10 the Flow Meter
will be in Lockout Mode.
LCK 10 (Default) To Unlock ensure Lck # is set to 10.
Programming Units of Flow
Program Flow Units 0 | 1 | 2
Ut = 0 : (LPM) Ut = 1 : (GPM) (Default) Ut = 2 : {Kiloliter (KL)}
K-Factor : 0.1 - 999.9 (K-Factor is Factory Preset)
K-Factor Preset (Do Not Change
*Divide K Factor BY 3.8 TO CHANGE FROM GPM TO LPM
TKM (4-20mA) and TKP with (RS 485 Option) Only
Programming Analog Transmitter Range Output 4-20mA
Range : 0.1 - 999.9 4 mA = 0 20 mA = Entered Number.
TR 100 (Default) 4 mA = 0 GPM 20mA =100 GPM
This can be Change to Conform to Customers Application (Ex. Number Changed to 150)
24V DC POWER ONLY
24V DC POWER ONLY
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
Icon Process Controls
CV
SV
GPM
FTM
TKM
OP2 TFM OP1 GPM
(HOLD)
www.iconprocon.com | sales@iconprocon.com | 905.469.9283
06
In-Line Paddle Wheel Flow Meter
TKP
|
TKM SERIES
(Quick Start)