ICON STAGE, User Manual, Page: 20 / 31

ICON STAGE USER MANUAL
19
3) Press< ENTER>
，
the display will show “Total run Time”.
4) The display will show “XXXX” (Hours).
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5.5 Last Run Time
With this function
，
you can display last the running time of the device. The display shows “XXXX”
，
“XXXX” stands for the number of hours.
1) Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until “Info”is
displayed. Press <ENTER>
，
the display will show “Info”.
2) Press <Up/Down>
，
the display will show “Last Run Time”.
3) Press< ENTER> ， the display will show “Last Run Time”.
4) The display will show “XXXX” (Hours).
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5.6 Temperature
Head Temperature
1) Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “Info” is
displayed. Press <ENTER> ， the display will show“Info”.Tap the <Up/Down>button
until “Temperature” is displayed. Press <ENTER> ， the display will show “Temperature”.
2) Press <Up/Down>
，
the display will show “Head Temperature”.
3) Press< ENTER>
，
the display will show “Head Temperature”.
4) The display will show“XXX℃/℃”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5.7 Service Setting
Password—— The Password for this function is “50”.
Clr Err Info
With this function you can clean the error information.
1) Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “Info” is
displayed. Press <ENTER>
，
the display will show “Info”. Tap the <Up/Down>button until
“Service Setting” is displayed. Press <ENTER>
，
the display will show “Service Setting”.
2) Press <Up/Down> ， the display will show “Clr Err Info”.
3) Press< ENTER> ， the display will show“Clr Err Info”.
4) The display show “OFF”
，
Press <Up/Down>
，
the display will show “ON”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5.8 Fan Speed
With this function
，
you can set the speed of the running fans. The selection have Head2UFan1
，
Head2UFan2 ， …….
1) Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until “Info” is
displayed. Press <ENTER>
，
the display will show “Info”.
2) Press <Up/Down>
，
the display will show “Fan Mode”.
3) Press< ENTER>
，
the display will show “Fan Mode”.
4) The display will show “Head2UFan1= xxxx RPM”
，
“Head2UFan2= xxxx RPM”
，
“……”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5.9 Error Info
With this function ， you can display the error informatin. The selection have Error Record 1 ， Error