Front Panel Layout
Monitor HP 1 / HP 2 headphone outputs
Each of these output jacks accepts a standard 1/4" stereo TRS headphone connector.
Monitor HP 1 / HP 2 headphone level controls
Each of these potentiometers controls the output level of its associated
headphone output.
(Note: These outputs and control knobs will not be functional unless Umix 1008 Satellite
USB2.0 audio interface add-in card installed.)
Rear Panel Layout
Umix1008 Satellite 10x8 (24-bit/192kHz) USB2.0 high-speed audio
interface add-in card slot
Expansion slot for connecting Umix 1008 Satellite 10x8 (24-bit/192kHz) USB2.0
high-speed audio interface add-in card.
User A / User B RCA connectors
These RCA connectors are able to connect to foot pedals to activate your selected
functions. To set their parameters, select USER A and USER B parameters at Mackie
control mode.
USB port
Connect your Qcon Pro to your Mac/PC via this USB port.
12V/5A power adaptor
Connect the provided power adaptor here.
(Note: Qcon Pro is not able to work without the provided power adaptor connected.
The USB bus power is not able to provide sufficient power supply for Qcon Pro.)
1
2
1
2
3
4
7
1
2
1
3
4
2
