Page 11
For technical questions, please call 1-877-987-4248.
Item 57740
SAFETY
MAINTENANCE
SETUP
OPERA
TION
OVER
VIEW
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Charging the Scanner Battery
NOTICE:
Only use the Power Adapter included with the Scanner. Use of any other adapter will
damage the unit.
Always charge on a non-flammable surface in a well-ventilated area.
1. To check the battery power level, press
and hold the Power Button about one
second to turn on the Scanner Tablet.
2. Power level is indicated as a percentage (%)
in the upper right-hand corner of the screen.
Note:
If the power level drops below 10% while
the Tablet is on a
Connect Charger
notification
will appear on the screen. If the power level
becomes very low the unit will shut itself off.
120 VAC Charging
1. Insert Power Cable into USB/Charging
Port on side of Scanner Tablet.
2. Insert Power Cable into 120VAC outlet.
3. The charging symbol will appear briefly on the
Tablet screen, indicating the battery is charging.
4. When charging is finished the charging complete
symbol replaces the charging symbol. Unplug
the 120 VAC Power Adapter from its outlet and
disconnect the USB Cable from the Tablet.
Charging with a Computer
1. Insert the large plug on the USB Cable
into a USB port on the computer.
2. Insert the small plug on the USB Cable
into the USB/Charging Port on the
side of the Scanner Tablet.
3. The charging symbol will appear briefly on the
Tablet screen, indicating the battery is charging.
4. When charging is finished the charging complete
symbol replaces the charging symbol. Disconnect
the USB Cable from the Tablet and the computer.
Power ON/OFF
1. Press and hold the Power Button about one
second to turn on the Tablet. The system starts
initializing and then enters the
Home
screen.
2. To turn the Tablet off, press and hold the
Power Button until an option menu appears.
Touch
Power Off
and then
OK
.
Screen Layout
On-Screen Buttons
There are four on-screen controls located at the bottom of the Tablet screen:
Back
– Touch the symbol to return to the previous screen.
Home
– Touch the symbol to return to the Tablet home screen.
Recent App
– Touch the symbol to view recently launched applications and any applications currently running.
Screenshot
– Touch the symbol to capture the current screen.
WSM
– Touch the
to access Vehicle Communication Interface.
Screen Preview
On the
Home
screen, touch and hold any blank area. A function menu will appear at the
bottom of the screen displaying wallpapers, widgets, settings, applications, etc.
