background image

15

HOW TO USE THE MANUAL MODE

Note: If there is a sheet of clear plastic on the face
of the console, remove the plastic.

1.

Begin pedaling or press any button on the
console to turn on the console.

A moment after you begin pedaling or press a
button, the screen will light.

2.

Select the manual mode.

Each time you turn on the console, the manual
mode will be selected. If you have selected a pro-
gram, reselect the manual mode by pressing any
of the program buttons repeatedly until a track
appears in the center of the screen.

3.

Change the resistance of the pedals as
desired.

As you pedal, change the resistance of the ped-
als by pressing any of the OneTouch Resistance 
buttons numbered 1 through 12. Note: After you
press the buttons, it will take a moment for the
pedals to reach the selected resistance level. 

4.

Follow your progress with the display.

As you exercise, the screen can display the fol-
lowing exercise information:

• The elapsed time. Note: When you select a

preset program or the second heart rate pro-
gram, the screen will show the time remaining
in the program instead of the elapsed time.

• The distance you have pedaled, in total revolu-

tions.

• Your pedaling pace in revolutions per minute

(rpm).

• The approximate number of calories you have

burned. 

• The resistance level of the pedals each time the

resistance changes.

• Your heart rate when you use the handgrip

pulse sensor (see step 5 on page 16).

When you select
the manual mode,
a track represent-
ing 1/4 mile will
appear on the
screen. As you
exercise, seg-
ments will appear
in succession around the track until the entire
track appears. The track will then disappear and
the segments will again begin to appear in succes-
sion

When the television is off, you can press the
Display button repeatedly to view either time and
pace information or to view all exercise informa-
tion on the screen.

When the television is on, you can display exer-
cise information on the right side or the bottom of
the screen. Or, you can turn off the exercise infor-
mation while you watch the television. Press the
Display button repeatedly to select the desired
display mode.

Summary of Contents for PRO-FORM Perspective 1000

































Reviews: