ICON PLATFORM B+, User Manual

Page: 61 / 69

61
Control Element Setup in User-Defined Mode
iMap
TM
Platform B+ software panel
You may re-assign each button with different function via iMap. Follow the
procedures below for the assignment.
1. Connect Platform B directly to your PC/Mac with the USB connection.
2. Launch iMap software.
3. Click the “Connect” button and select “Platform B+ V1.00”, then click “OK”
4. Click a button to make an assignment; it should turn blue.
5. Select a “Control Mode” according to the DAW you are using.
6. Select a function from the drop down “Function” menu.
7. Repeat steps 4 & 6 to assign functions to all the other buttons.
8. Click the “Send Data” button after completing assignment.
Please refer to the appendix for the function list with different control modes.