25
THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the televisionʼs memory.
1. Hold down the Stop button while inserting the
key into the console.
When the information mode is selected, the lower
part of the screen will show the total number of
miles or kilometers that the walking belt has moved
(DISTANCE) and the total number of hours that the
treadmill has been used (TIME).
In addition, the center of the screen will show the
word ENGLISH, for miles, or the word METRIC, for
kilometers. Press the Speed increase button to
change the unit of measurement if desired.
The words AUDIO TRAINER: ALL, AUDIO
TRAINER: ON, or AUDIO TRAINER: OFF will also
appear in the center of the screen. When you use
an iFit card, the voice of a personal trainer will
guide you through your workout. When the AUDIO
TRAINER: ALL setting is selected, the personal
trainer will guide you through your workout and in-
struct you how to purchase more iFit cards. When
the AUDIO TRAINER: ON setting is selected, the
personal trainer will simply guide you through your
workout. When the AUDIO TRAINER: OFF setting
is selected, the voice of the personal trainer will not
be heard. Press the Incline decrease button repeat-
edly to select the desired audio setting.
The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the con-
sole will function normally when you plug in the
power cord, switch the reset/off circuit breaker to
the reset position, and insert the key into the con-
sole. However, when you remove the key, the dis-
plays will remain lit, although the buttons will not
function. If the demo mode is turned on, the words
DEMO ON will appear in the center of the display
while the information mode is selected. To turn on
or turn off the demo mode, press the Speed de-
crease button.
2. Press the Power button and adjust the bright-
ness, contrast, color, sharpness, and/or hue of
the television.
When you press the Power button, the brightness
level indicator will appear on the television screen.
Press the Volume (VOL.) buttons to adjust the
brightness setting if desired.
Next, press the Channel (CH.) buttons until the con-
trast, color, sharpness, or hue level indicator ap-
pears. Adjust the settings, if desired, by pressing the
Volume buttons.
3. Press the Power button again and add or
remove channels.
Note: Complete this step only if you are using ana-
log cable.
After all valid channels available in your area have
been saved into the televisionʼs memory (see step
5 on page 26), you can manually add channels or
remove unwanted channels.
To add or remove a channel, first press the
Channel buttons until the desired channel number
appears on the screen. Then, press the Volume in-
crease button to add the channel, or the Volume
decrease button to remove the channel. Continue
this process until you have added all desired chan-
nels and removed all unwanted channels.
4. Press the Power button again and select a cable
connection if necessary.
If you have connected a CATV cable, one of the
three Cable settings should be selected; try all
three Cable settings, if necessary, to find the opti-
mal setting. Press the Volume increase button to
select the STANDARD Cable setting, the Channel
decrease button to select the Cable IRC setting, or
the Channel increase button to select the Cable
HRC setting.
