10
5. Connect the Base Wire (52) to the Upright Wire
(75).
The connectors should slide together
easily and snap into place with an audible
click. If they do not, turn one connector and
try again.
Then, remove the tie (A) from the Base Wire
(52), and insert the connectors into the hole (B)
in the right Upright (83).
52
75
83
A
B
5
6
109
108
6 Set the left handrail assembly (C) on the floor in
the position shown.
Attach the Push Bar Bottom (109) to the left
handrail assembly (C) with two 5/16" x 3/4"
Patch Screws (108);
do not fully tighten the
Patch Screws yet.
Attach the Push Bar Bottom (109) to the right
handrail assembly (D) in the same way.
C
D
108
Summary of Contents for NordicTrack COMMERCIAL X32i
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 32: ...32 NOTES...
