12
10. With the help of a second person, hold the con-
sole assembly near the Left Handrail (71).
Connect the Upright Wire (70) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the
Upright Wire.
Console
Assembly
Console
Wire
Wire
Tie
71
70
70
Console
Wire
10
11. Set the console assembly on the Left Handrail
(71) and the Right Handrail (72).
Be careful not
to pinch any wires.
Insert the excess Upright
Wire (not shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (13), four 5/16" x 5/8" Screws (10),
and four 5/16" Star Washers (8).
Start all ten
Screws, and then tighten them.
8
71
13
11
Console
Assembly
13
72
8
10
13
13
10
Summary of Contents for NETL10713.0
Page 33: ...33 NOTES ...
