ICON NeoAmp, Owner'S Manual

Page: 9 / 16

5
Operating the NeoAmp
O N
O FF
4 CHANNELS STEREO
HE ADPHONE AMP
HEADPHONE 1 HEADPHONE 2 HEADPHONE 3 HEADPHO NE 4
LEVE L1 LE VE L2 LEVE L3 LEVE L4
The basic procedure for setting up and using your NeoAmp is simple and takes
only a few minutes. Remove all packing materials (save them in case they are
needed for future service or transportation) and check to make sure that you
remove the supplied AC power adapter.
Before you connect your headphones, be sure to double
check that all level controls are turned all the way down (fully counter clockwise
position). The NeoAmp is small, but powerful. It can generate loud signal levels
into the connected headphones. We recommend that you exercise extreme
caution and care for your ears. Always start with the level controls all the way off
and slowly raise the signal to a comfortable listening level.
Connect the output from the device you want monitored to the STEREO INPUT
jacks on the NeoAmp Rear panel.
Set the controls to the following positions:
IMPORTANT NOTE:
Turn the four headphone channel LEVEL knobs to their minimum (fully
counterclockwise) setting.
Plug the NeoAmp power adapter into a wall outlet.
Apply a signal, like the output of a mixer playing a CD, to the NeoAmp's STEREO
INPUT jack.
Connect a set of headphones to Channel 1 and slowly turn the channel's LEVEL
knob clockwise until you hear the desired level.