6
6
3
2
4
5
1.1
1
Front Panel
1. 3-pin XLR (Balanced) – For condenser microphone with +48V
phantom power
1.1. 1/4” TS (Unbalanced) – For dynamic microphone
Please refer to P.23 for the connection method of different type of microphone.
Note:
Master level control will only adjust the output level of both the Line
output 1/2 and the 3.5mm stereo output.
2. 48V phantom power switch
Press to 48V phantom power to the associated XLR input. This phantom
power circuit is suitable for most condenser microphones.
3. Input gain level controls (Microphone)
This potentiometer controls the input level of the analog microphone input.
4. Input gain level controls (Guitar)
This potentiometer controls the input level of the analog Guitar input.
5. Headphone level control
This potentiometer controls the output level of the headphone output.
6. Headphone output
This output jack accepts a standard 1/4″ stereo TRS headphone connector.