9
Rear Panel
1. USB 2.0 connector (Type C)
Connect it with the provided USB cable Type C
to your Mac/PC/iOS device
camera kit’s USB connector. Your Mac/PC must have a USB2.0 connector in
order to run the full speed of MobileU Dyna.
2. Line outputs 1/2
These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU
line level.
3. Smart Device I/O (Digital - Type C & Analog - 3.5mm TRRS)
These ports allow you to connect your smart device and your Mac/PC
simultaneously so you may process the audio signal with your Mac/PC before
delivering signal to the smart device for live streaming application.
Digital - Type C jack for connecting directly to the digital jack of the smart
device (OTG adapter raquired)
Analog - TRRS stereo jack for connecting directly to smart device’s audio I/O
4. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors.
5. Power supply connector (USB Type C)
MobileU Dyna is USB-bus powered. If your computer does not supply sufficient
power, connect an ICON 5VDC power supply adapter to this jack. Or you may
try to use your smart phone power adapter with the correct cable type (USB
Type C). Normally it should work and provide enough power to the device.
(
Note:
You can get the power adapter from ICON distributors/dealers near you)
(
Note:
External power adapter is needed if the MobileU Dyna is use as a
standalone unit without a Mac or PC)
5
1
3
2
4
