11
3. General setting to the keyboard
3.1 “Save file” button
Click this button to save your current settings for the iKeyboard. The file is an “.ikeyboard” file.
3.2 “Load file” button
Click this button to load a previously saved “. ikeyboard” setting file for your iKeyboard.
3.3 “Send Data” button
Click this button to upload the iMap
TM
software settings to your iKeyboard via USB connection.
Note:
You must have connected your iKeyboard to your Mac/PC, otherwise the settings upload
will not be successful.
3.4 “MIDI Devices” button
Click this button, a MIDI device select window will appear as shown in diagram 13. Please
select “ICON iKeyboard” for the MIDI Out Devices.
3.5 “Firmware Upgrade” button
Click this button to enter into the firmware upgrade window for iKeyboard. Please refer to P.12
for the firmware upgrade procedure.
3.5
3.2
3.1
3.4
3.3
Diagram 12
Diagram 13
