Assign the MIDI channels and MIDI parameter to the knobs
There are 11 control knobs on iDJX you may assign. Select your desired MIDI
channel (1-16) and MIDI parameter such as CC , note & program value for the
knobs. There are two values that you can set for each knob as follows:
1)
. Rotate (Upper) – Setting the midi data for rotating the knob.
2)
. Enter (Lower) – Setting the midi data for pressing down (i.e. enter) the knob.
“Save file” button
Click this button to save your current settings for the iDJX. The file is an “.idjx” file.
“Load file” button
Click this button to load a previously saved “. idjx” setting file for your iDJX.
“Send Data” button
TM
Click this button to upload the iMap software settings to your iDJX via USB
connection.
(Note: You must have connected your iDJX to your Mac/PC, otherwise the settings
upload will not be successful.)
“MIDI Devices” button
Click this button, a MIDI device
select window will appear as
shown in diagram1. Please
select “ICON iDJX” for the MIDI
Out Devices.
“Firmware Upgrade” button
Click this button to enter into the firmware upgrade window for iDJX.
Please refer to P.10 for the firmware upgrade procedure.
4
Diagram 1
5
6
7
8
9
9
Assign the MIDI channels and MIDI parameter to the control buttons
There are 32 control buttons on iDJX you may assign. Select your desired MIDI
channel (1-16) and MIDI parameter such as CC , note & program value in the
pull-down menu for the control buttons.
3
