TM
iMap iDJ software panel
(continues)
Select the 4 different layers and choose the desired settings for each layer
You may have 4 different “Layers” for different applications. Each “Layer” can
have its own control settings.
Select the crossfader curve value
You may select the curve characteristic from 0 to 64 for the crossfader.
Set iDJ as a Master or Slave device
You may cascade your iDJ with other ICON's i-series controllers (refer to p.13
for details). Set the iDJ as “Master” device if used on its own. Set it to “Slave”
if it is connect to another i-series controller.
“Save file” button
Click this button to save your current settings for the iDJ. The file is an
“.icon” file.
“Load file” button
Click this button to load a previously saved “.icon” setting file for your iDJ.
“Send Data” button
TM
Click this button to upload the iMap software settings to your iDJ via
USB connection.
(Note: You must have connected your iDJ to your Mac/PC, otherwise the settings upload will
not be successful.)
“MIDI Devices” button
Click this button, a MIDI device select window
will appear as shown in diagram 1. Please
select “ICON iDJ” for the MIDI Out Devices.
8
10
C.F. curve set to value “64”
C.F. curve set to value “0”
Centre
(Centre)
(Centre)
A
B
AB
9
11
12
13
14
Restore the factory default settings
By holding down the “C.F. Curve/Layer” more than 4sec., the settings
of the iDJ will return to its factory default condition.
Diagram 1
12
