SAFETY WARNING:
The liner is essential to the intended performance of the
helmet, it must be properly installed when using the helmet. Failure to properly
install the liner may result in serious injury or death.
1. With the helmet upside down and with the chin bar facing
away from you release each cheekpad from the helmet by
pulling inward, freeing it from the snap and velcro system.
Note how the chin straps thread through the cheekpads and
how the cheekpad plate slips between the helmet shell and
EPS liner for reassembly.
2. Remove comfort liner by releasing it from the two
snap system on the back of the helmet. Then remove the
two snaps in the brow. Then remove the crown comfort
liner attachment point, taking note of how the crown plate
attachment slips into place between the shell and EPS liner.
3. Reverse these steps to reinstall the comfort liner and
cheekpads.
How to remove your interior for cleaning or replacement:
COMFORT LINER
COMFORT LINER
09
10
REMOVAL & INSTALLATION
PERFORMANCE WICKING COMFORT
The ICON
®
DOMAIN™ features an optimized interior fit lined
with ICON’s exclusive moisture wicking material, HYDRADRY™.
HYDRADRY™ Liners can be custom fit within each shell size,
applying a tighter or looser fit to correspending helmets within
the same shell size.
To order replacement interior components visit your local
dealer or
www.rideicon.com
.
DomainManual_5-05-22.indd 9-10
DomainManual_5-05-22.indd 9-10
5/6/22 4:08 PM
5/6/22 4:08 PM
