7
Rear Panel
3
2
3
1
4
6
5
1. USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC’s USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of
Cube6Nano-VST.
2. Line inputs 3/4
These are unbalanced analog inputs on standard 1/4″ TS connectors at
–10dB line level.
3. Line outputs 1-4
These are unbalanced analog outputs on standard 1/4″ TS connectors at
+6dBU line level.
4. S/PDIF coaxial I/O connectors
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the Cube6Nano-VST's software control panel, while the digital
output will be sent to the coaxial.
5. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors
6. 12V/1A power adaptor
Connect the provided power adaptor here.
Note:
Cube6Nano-VST is not able to work without the provided power
adaptor connected. The USB bus power is not able to provide sufficient power
supply for Cube6Nano-VST.
