FIG.1: FOOTWEAR MINIMUM UPPER
HEIGHT DEFINITION OF H1 AND H2
FIG.2
CHART 3: DIMENSIONS FOR MATERIAL AREAS SHOWN IN FIG.2
Y
X
F
2
G
5˚
1
Size
(Paris Points)
Size
(English)
“
F
”
“
G
”
Minimum (mm)
Maximum (mm)
38 and Below
5 and below
40
120
39-42
5.5 to 8
50
125
43 and above
8.5 and above
55
130
The lower tangent of Zone 2 is used to define the lower limits of measure-
ment
F
&
G
. Zone 2 is located by centering point
X
over the natural center of
the ankle as felt through the footwear when worn.
Zone 1 Shin Region
1
Zone 2 Ankle Region
2
Keys for
F
and
G
See Chart 3
Area A
Area B
FIG.2 KEY
PROTECTION LIMITATIONS
GENERAL USE:
Carga CE
Boots are intended to protect against ambient conditions without excessively impairing the user’s ability to control the motor-
cycle while operating the foot controls.
Carga CE
Boots are designed with safety and dexterity in mind.
Carga CE
Boots are considered
to be PPE because they are designed and manufactured to provide
limited
protection to the foot and ankle during an accident or in
the event of a fall from a motorcycle. Additional particular hazards encountered during an on-road motorcycle accident may include:
impacts with the rider’s motorcycle, conflicting vehicles, and other roadside objects. The chances of serious injury are increased if the
foot becomes trapped under the motorcycle during a sliding impact.
Carga CE
Boots
will not
prevent traumas caused by high-energy
impacts, traumas caused by severe forces of bending, twisting, torsion, or crushing as the result of striking an object, or traumas caused
by extreme movements or massive penetrations. The force levels used in the tests
do not
compare directly to the forces motorcyclists are
exposed to in real-world accidents, therefore, products that meet the requirements of the
EN 13634:2017
Standard may only reduce
the severity of some minor injuries. No protective footwear, can offer complete protection against all injuries, the principle is to create a
product that will help to reduce the risk of injury to the area, for which, the PPE was designed to provide limited protection.
MISUSE THAT WILL DEGRADE
CARGA CE
BOOTS PERFORMANCE:
Carga CE
Boots must be worn to provide any protection. Improper use of the
Carga CE
Boots can seriously compromise effectiveness
and reduce performance. In order for the
Carga CE
Boots to retain their original protective capabilities only use the
Carga CE
Boots for
the purposes described in the “Use Restrictions and Limitations” section of this user manual. Never tamper with any part of the boots.
Never bend or twist the boots excessively as this constitutes improper use. Do not paint the boots or use colorants of any nature.
ENVIRONMENTAL CONDITIONS THAT WILL DEGRADE
CARGA CE
BOOTS PERFORMANCE:
Contamination with foreign substances and/or improper care can seriously compromise the
Carga CE
Boots‘ effectiveness and reduce
their performance. Do not expose the
Carga CE
Boots to extreme, direct sunlight or extreme moisture. Do not expose the
Carga CE
Boots
to extremely high or low temperatures like those found in a closed car or outdoor storage.
SAFETY WARNINGS
2021-03-17_CargaCEBootManual.indd 12-13
2021-03-17_CargaCEBootManual.indd 12-13
3/18/21 4:34 PM
3/18/21 4:34 PM
