2141 ICON Way, Vacaville, CA 95688
‐
Tel: 707.564.4000
– www.iconaircraft.com
SERVICE BULLETIN
SB-110521 REV A
ICA009719-D
PAGE
6
of
8
17.
Reconnect the D9087P connector onto the bottom connector of the fuel pump
18.
Reconnect the D9100P connector onto the top connector of the fuel pump.
19.
Verify locking features of both connectors are engaged.
20.
Switch the Master Switch to ON.
21.
Rotate Ignition Switch to lane A. Verify fuel pump comes on and primes. Confirm FUEL PRESS light out.
22.
Rotate Ignition Switch to lane B. Verify fuel pump comes on and primes. Confirm FUEL PRESS light out.
23.
Rotate Ignition Switch to BOTH. Confirm ENGINE and LAND AIRCRAFT lights out.
24.
Discard the connectors and contacts removed from the aircraft.
CORRECTIVE ACTION: FUEL PUMP EXTENSION CONNECTOR INSPECTION
25.
It is permissible to disassemble the aircraft as required to permit accessibility, inspection,
adjustment, maintenance, and repair in accordance with the latest release of the Aircraft
Maintenance Manual.
26.
Locate fuel pump extension connectors below aft bulkhead cut-out. See
.
27.
Remove tie wraps and F4 tape, as necessary, to facilitate inspection of the connectors.
Figure 4: Fuel Pump Extension Connectors View
