Page 4
For technical questions, please call 1-888-866-5797.
Item 58003
Two Jaw
Note:
Use appropriate sized parts
for object being removed.
Note:
Attach Jaws pointing out for internal
pulling and pointing in for external pulling.
1. Insert Small Pin (10) through 2-Way
Jaw Control (5) and desired size
of Jaw. Apply this to both Jaws.
2-Way Jaw
Control (5)
Small Pin (10)
2. Connect Two Jaw Yoke (7) to both
Jaws. Insert two Large Pins (11)
through either inner or outer holes.
Use same hole on each side.
Two Jaw
Yoke (7)
Large
Pin (11)
3. Insert Pressure Screw with T-bar (9)
through Jaw Frame Knob (4) and
Two Jaw Yoke by threading Pressure
Screw with T-bar clockwise.
4. Insert Plug Pin (12) into
Pressure Screw with T-bar.
Pressure Screw
with T-bar (9)
Jaw
Frame
Knob (4)
Plug Pin (12)
5. Place Jaws onto application.
6. Turn Jaw Frame Knob Clockwise so
that Jaws firmly grip onto application.
7. Turn Pressure Screw with T-bar
clockwise until Plug Pin is properly
seated and makes contact with
center of application mount.
8. Continue turning Pressure
Screw with T-bar clockwise until
application is removed.
