ICON 56140, Owner'S Manual & Safety Instructions

Page: 14 / 22

Page 6
73" TOP CHEST
For technical questions, please call 1-888-866-5797.
6. Chest Slide installation:
a. Align the tabs on the
Chest Slide with the
holes on the side of
the Housing. Align
the rear tab first, then
lower the front tabs
into the front holes.
b. Align the screw
hole in the center
of the Chest Slide
with the screw hole
on the Housing.
Secure it with a Slide Screw.
7. Install the Drawers according to the following instructions:
a. Select a properly-sized Drawer to install.
b. Confirm that all Chest Slides are properly
aligned with the slides on the Drawer.
c. Slide all Chest Slides out fully.
d. Confirm that ball bearing racks are
at the front of each Slide.
e. Carefully partially slide the Drawer in and check
again that all slides are engaging properly.
NOTICE: DO NOT FORCE THE DRAWER.
If the Drawer does not slide in easily, the slides are
likely misaligned or not installed correctly.
f. Slide the Drawer in completely.
g. Slide it back out to make sure the slides
keep it from coming disengaged.
h. Slide the Drawer closed.
holes
Figure E