4
SET THE DATE AND TIME
1.
Plug the power supply into the port located on the bottom of the clock.
2.
Plug the power supply into a wall outlet.
3.
The display will read:
Set Date/Time
.
4.
Press or on the time clock to select the current month. Press
Enter
.
5.
Follow the same procedure to advance through each step as prompted to
complete the date and time setup. If you make a mistake, press
Clear
on
the time clock to go back and correct the entry.
6.
Once you’ve completed these steps, the time clock will display:
Date and Time Set
.
If the clock detects a Wi-Fi connection, the display will read:
Network Detected Press Enter
.
^
^
TotalPass B600 Time Clock
Power Supply
Wall Outlet
