6
1.
Orient the two Base Frames (1), the Center
Base (4), and the Rear Base (35) as shown.
Make sure that the large warning decal on
the Rear Base is in the position shown.
Attach the Center Base (4) to the two Base
Frames (1) with four M10 x 90mm Bolts (19),
four M10 Washers (30), and four M10 Locknuts
(25).
Do not tighten the Locknuts yet.
Attach the Rear Base (35) to the two Base
Frames (1) in the same way.
1
25
1
4
35
1
Large
Warning
Decal
25
30
30
30
30
19
19
ASSEMBLY
To make assembly easier, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the exercise rack
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the exercise rack as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Before beginning assembly, make sure
that you understand the information in
the box above.
All manuals and user guides at all-guides.com
all-guides.com
