16
16. Remove the two 5/16" x 3/4" Screws (25) from
the Latch Crossbar (38).
Raise the Frame (56) to the upright position.
IMPORTANT: Do not raise the Frame past the
vertical position. Have a second person hold
the Frame until step 18 is completed.
Orient the Latch Crossbar (38) as shown.
Make
sure that the “This side toward belt” sticker
(F) is facing the treadmill.
Attach the Latch
Crossbar to the brackets on the Frame (56) with
the two 5/16" x 3/4" Screws (25) that you just
removed and two 5/16" Star Washers (11).
56
38
F
11
11
25
25
Brackets
16
17. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4"
Bolt (3) from the bracket on the Base (94).
Next, orient the Storage Latch (53) as shown.
Attach the lower end of the Storage Latch (53) to
the bracket on the Base (94) with a 5/16" x 2 1/4"
Bolt (3) and a 5/16" Nut (12).
Raise the Storage Latch (53) to a vertical posi-
tion. If there is a tie in the top of the Storage
Latch, remove and discard it.
94
53
3
12
Tie
17
Summary of Contents for PRO-FORM POWER 1495
Page 5: ...5...
