35
b.
If the walking belt slips when walked on,
fi
rst
remove the key and
UNPLUG THE POWER
CORD.
Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walk-
ing belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and walk on the treadmill for a
few minutes. Repeat until the walking belt is prop-
erly tightened.
SYMPTOM: The iFit mode does not function
correctly
a.
If the iFit mode is not functioning correctly, make
sure that the incline trainer has the most current
firmware available (see page 29).
SYMPTOM: The treadmill will not connect to the
wireless network
a.
Make sure that the wireless settings on the console
are correct (see page 30).
b.
Make sure that the settings for your wireless net-
work are correct.
c.
If you still have questions, see the front cover of
this manual.
b
Summary of Contents for PRO-FORM PERFORMANCE 900i
Page 5: ...5...
