background image

18

HOW TO PLUG IN THE POWER CORD

This product must be grounded. If it should mal-

function or break down, grounding provides a path of 

least resistance for electric current to reduce the risk 

of electric shock. The power cord has a plug with a 

grounding pin.

Plug the 

power cord 

into an 

appropriate 

outlet that 

is properly 

installed and 

grounded in 

accordance 

with all 

local codes 

and ordinances. The outlet must be on a nominal 

120-volt circuit. 

A temporary 

adapter may 

be used to 

connect the 

power cord 

to a 2-pole 

receptacle 

as shown 

at the right 

if a properly 

grounded 

outlet is not 

available. 

The lug or wire extending from the adapter must 

be connected with a metal screw to a permanent 

ground such as a properly grounded outlet box cover. 

Some 2-pole receptacle outlet box covers are not 

grounded. Before using an adapter, contact a 

qualified electrician to determine whether the out-

let box cover is grounded before using an adapter. 

The temporary adapter should be used only until 

a properly grounded outlet can be installed by a 

qualified electrician.

Grounded Outlet

Grounding Pin

HOW TO USE THE ELLIPTICAL

    DANGER:

 

Improper connection of 

the power cord increases the risk of electric 

shock. Do not modify the plug—if it will not fit 

an outlet, have a proper outlet installed by a 

qualified electrician. If you are unsure whether 

the product is properly grounded, contact a 

qualified electrician.

2-pole Receptacle

Adapter

Lug

Metal Screw

Summary of Contents for PRO-FORM ENDURANCE 920 E













































Reviews: