8
• To hire an authorized service technician to
assemble the treadmill, call 1-800-445-2480.
• Assembly requires two persons.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
•
After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 7.
•
Assembly requires the following tools:
the included hex keys
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
ASSEMBLY
2
2.
Make sure that the power cord is unplugged.
Carefully
raise the Right Upright (70) to the verti-
cal position.
Next, start an M10 x 58mm Screw (1) and an
M10 x 25mm Screw (2) into the Base (74) and
the Right Upright (70) as shown;
start both
Screws, and then tighten them.
Repeat this step on the left side of the
treadmill.
2
74
70
1
1.
To use the assembly steps in this manual, first see the helpful tips below.