background image

22

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH 

Smart heart rate monitors.

HOW TO CONNECT YOUR SMART DEVICE TO THE 

CONSOLE

The console supports BLUETOOTH connections to 

smart devices via the iFit app and to compatible heart 

rate monitors. Note: Other BLUETOOTH connections 

are not supported.

1.   Download and install the iFit app on your smart 

device.

   On your iOS

®

 or Android™ smart device, open the 

App Store℠ or the Google Play™ store, search for 

the free iFit app, and then install the app on your 

smart device. Make sure that the BLUETOOTH 

option is enabled on your smart device. 

   Then, open the iFit app and follow the instructions 

to set up an iFit account and customize settings.

2.   Connect your smart device to the console.

   Follow the instructions in the iFit app to connect 

your smart device to the console. 

   When a connection is established, the LED on the 

console will flash blue. Press the Bluetooth Smart 

button on the console to confirm the connection; 

the LED on the console will then turn solid blue.

3.  Record and track your workout information.

   Follow the instructions in the iFit app to record and 

track your workout information.

4.   Disconnect your smart device from the console 

if desired. 

   To disconnect your smart device from the console, 

press and hold the Bluetooth Smart button on the 

console for 5 seconds.

   Note: All BLUETOOTH connections between the 

console and other devices (including any smart 

devices, heart rate monitors, and so forth) will be 

disconnected.

HOW TO CONNECT YOUR HEART RATE MONITOR 

TO THE CONSOLE

The console is compatible with all BLUETOOTH Smart 

heart rate monitors.

To connect your BLUETOOTH Smart heart rate moni-

tor to the console, press the Bluetooth Smart button 

on the console. When a connection is established, the 

LED on the console will flash red twice. 

Note: If there is more than one compatible heart rate 

monitor near the console, the console will connect to 

the heart rate monitor with the strongest signal.

To disconnect your heart rate monitor from the console, 

press and hold the Bluetooth Smart button on the con-

sole for 5 seconds.

Note: All BLUETOOTH connections between the con-

sole and other devices (including any smart devices, 

heart rate monitors, and so forth) will be disconnected.

Summary of Contents for PFEL05815.3

































Reviews: