background image

33

 HOW TO FOLD AND MOVE THE TREADMILL

 HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline 

to zero before you fold the treadmill. Then, remove 

the key and unplug the power cord. CAUTION: You 

must be able to safely lift 45 lbs. (20 kg) to raise, 

lower, or move the treadmill.

1.    Hold the metal frame firmly in the location shown 

by the arrow below. CAUTION: Do not hold the 

frame by the plastic foot rails. Bend your legs 

and keep your back straight.

2.   Raise the frame until the storage latch locks in the 

storage position. CAUTION: Make sure that the 

storage latch locks.

  

To protect the floor or carpet, place a mat under the 

treadmill. Keep the treadmill out of direct sunlight. 

Do not leave the treadmill in the storage position in 

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, fold it as described at the 

left. CAUTION: Make sure that the storage latch is 

locked in the storage position. Moving the treadmill 

may require two people.

1.    Hold the frame and one of the handrails, and place 

one foot against a wheel.

2.     Pull back on the handrail until the treadmill will roll 

on the wheels, and carefully move it to the desired 

location. CAUTION: Do not move the tread-

mill without tipping it back, do not pull on the 

frame, and do not move the treadmill over an 

uneven surface.

3.    Place one foot against a wheel, and carefully lower 

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.     Push the upper end of 

the frame forward, and 

gently press the upper 

part of the storage latch 

with your foot at the 

same time.

2.     While pressing the stor-

age latch with your foot, 

pull the upper end of the 

frame toward yourself.

3.   Step back and let the 

frame lower to the floor.

Frame

1

Handrail

Wheel

Frame

1

2

Frame

Storage 

Latch

1

2

Summary of Contents for NTL14114.0













































Reviews: