6
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 12mm
Screw (32)–8
M5 x 50mm
Lag Screw (35)–2
M8 x 15mm
Screw (31)–1
M6 x 10mm
Screw (34)–2
M8 x 16mm
Screw (30)–4
Summary of Contents for NordicTrack Vault
Page 4: ...4 STANDARD SERVICE PLANS...
