7
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you
fi
nish all assembly steps.
• After shipping, there may be an oily substance on
the exterior of the incline trainer. This is normal.
If there is an oily substance on the incline trainer,
wipe it off with a soft cloth and a mild, non-abra-
sive cleaner.
• To identify small parts, see page 6.
• Assembly requires the following tools:
the included hex keys
a standard screwdriver
To avoid damaging parts, do not use power tools.
1.
To register your product and activate your
warranty in the UK,
go to iconsupport.eu. If
you do not have internet access, call Customer
Service (see the front cover of this manual).
To register your product and activate your
warranty in Australia,
email or post the
following information to the email address or
postal address on the front cover of this manual.
• your receipt (make sure to keep a copy)
•
your name, address, and telephone number
•
the model number, serial number, and name
of your product (see the front cover of this
manual)
1
2.
Make sure that the power cord is unplugged.
Remove the four 3/8" x 3 1/4" Screws (18) from
the Base (74) (only one side is shown).
Save the
Screws.
74
18
2
