12
14. Attach the Tablet Holder (10) to the Console (9)
with four Tablet Holder Screws (142); start all
the Tablet Holder Screws, and then tighten
them.
15. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included.
Place a mat beneath the elliptical to protect the floor.
48
143
12
13
14
13. Tip: Avoid pinching the wires. Attach the
Console Bracket Cover (48) to the Accessory
Tray (111) with two M4 x 16mm Screws (143).
Avoid pinching
the wires
12. Tip: Avoid pinching the wires. Attach the
Console (9) to the Console Bracket (5) with four
M4 x 16mm Screws (143); start all the Screws,
and then tighten them.
Avoid pinching
the wires
9
5
111
10
142
143
9
