background image

28

HOW TO CONNECT TO A WIRELESS NETWORK

The console is Wi-Fi enabled, allowing you to set up a 
wireless network connection.

1.  Select the home screen.

 

See step 2 on page 22.

2.  Select the wireless network menu.

 

 Touch the menu button (three horizontal lines sym-
bol), and then touch the Wi-Fi

®

 symbol to enter the 

wireless network menu.

3. Enable 

Wi-Fi.

 

 Make sure that Wi-Fi is enabled. If it is not, touch 
the Wi-Fi toggle to enable a wireless connection.

4.  

Set up and manage a wireless network 
connection.

 

 When Wi-Fi is enabled, the screen will show a list 
of available networks. Note: It may take several 
seconds for the list of wireless networks to appear.

 

 Note: You must have your own wireless network 
and an 802.11b/g/n router with SSID broadcast 
enabled (hidden networks are not supported). 

 

 When a list of networks appears, touch the desired 
network. Note: You will need to know your network 
name (SSID). If your network has a password, you 
will also need to know the password.

 

 An information box will ask if you want to connect 
to the wireless network. Touch 

Join

 to connect to 

the network or touch 

Cancel

 to return to the list of 

networks. If the network has a password, touch the 
password entry box. A keyboard will appear on the 
screen. To view the password as you type it, touch 
the 

Show Password

 checkbox.

 

 To use the keyboard, see HOW TO USE THE 
TOUCH SCREEN on page 20.

 

 When the console is connected to your wireless 
network, a checkmark will appear next to the wire-
less network name.

 

 To disconnect from a wireless network, touch and 
hold the name of the wireless network and then 
touch 

Forget

.

 

 If you are having problems connecting to an 
encrypted network, make sure that your password 
is correct. Note: Passwords are case-sensitive.

 

 Note: The console supports unsecured and 
secured (WEP, WPA™, and WPA2™) encryption. 
A broadband connection is recommended; perfor-
mance depends on connection speed. 

 

 Note: If you have questions after following 
these instructions, go to support.iFIT.com for 
assistance.

5.  Exit the wireless network menu.

 

 To exit the wireless network menu, touch the back 
arrow on the screen.

Summary of Contents for NordicTrack EXP 14i













































Reviews: