13
10
E
A
10. With the help of a second person, set the con-
sole assembly (E) on the Console Frame (40).
Make sure not to pinch the Upright Wire (88).
Next, insert the Upright Wire (88) through the
indicated looped tie (I).
Connect the Upright Wire (88) to the wire (J)
from the console assembly (E).
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
Then, remove any wire ties (A) from the Upright
Wire (88).
I
J
88
11
11.
IMPORTANT: To avoid damaging the
Crossbar (87), do not use power tools and do
not overtighten the #10 x 3/4" Screws (6).
Attach the Crossbar (87) to the Handrails
(80, 81) with four #10 x 3/4" Screws (6) and four
1/4" Star Washers (10);
start all four Screws,
and then tighten them.
6
10
10
80
81
87
6
10
40
