28
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first
press the power switch and unplug the
power cord.
Next, using a
standard screw-
driver, carefully
pry off the left Disc
(71).
See the drawing at the right.
Locate the Reed Switch
(38). Turn the Pulley (19) until a Magnet (43) is aligned
with the Reed Switch.
See the drawing at the right.
Slightly loosen the indi-
cated two M4 x 12mm Self-tapping Screws (50). Slide
the Reed Switch (38) slightly closer to or away from
the Magnet (43), and then retighten the Self-tapping
Screws.
Then, plug in the power cord, press the power switch,
and rock the Pulley (19) forward and backward just
enough that the Magnet (43) passes the Reed Switch
(38) repeatedly. Repeat these actions until the console
displays correct feedback.
When the reed switch is correctly adjusted, reattach
the left disc and plug in the power cord.
71
19
43
50
38
