16
17.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the
fl
oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 35 and 36). Note: Extra parts may be
included.
16
16
Start First
16. Press the two tabs on the Tablet Holder (16) into
the slots (J) in the console assembly (E).
Attach the Tablet Holder (16) to the console
assembly (E) with four #8 x 5/8" Machine Screws
(108).
Note: Start the two top Machine Screws
fi
rst, and then start the two bottom Machine
Screws. Be careful not to overtighten the
Machine Screws.
IMPORTANT: The Tablet Holder (16) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
E
J
108
Summary of Contents for NORDICTRACK COMMERCIAL 2950
Page 5: ...5...
