background image

20

 HOW TO SET UP THE CONSOLE

Before using the treadmill for the first time, set up the 
console. 

1.  Connect to your wireless network.

 

 To access the internet, download iFit workouts, and 
use several other features of the console, you must 
be connected to a wireless network. Follow the 
prompts on the screen to connect the console to 
your wireless network.

2. Customize 

settings.

 

 Fill in the form on the screen to set the console 
to display the desired unit of measurement and 
your time zone. Note: If you need to change these 
settings later, see HOW TO CHANGE CONSOLE 
SETTINGS on page 25.

3.  Log into or create an iFit account.

 

 Provide your email address, and follow the prompts 
on the screen to sign up for or log into your iFit 
account.

4.  Tour the console.

 

 The first time you turn on the treadmill, dialogue 
boxes on the screen will guide you through the 
features of the console. 

5.  Check for firmware updates.

 

 First, touch your name or 

Hello

 on the screen, and 

then touch 

Settings

. Next, select the maintenance 

section. Then

,

 touch 

Update

 to check for firmware 

updates using your wireless network. See step 5 
on page 25 for more information.

6.  Calibrate the incline system.

 

 First, touch your name or 

Hello

 on the screen. 

Next, select the settings main menu. Then, select 
the maintenance section, touch 

Calibrate Incline

and then touch 

Begin

 to calibrate the incline sys-

tem. See step 6 on page 25 for more information.

The console is now ready for you to begin working out. 
The following pages explain the various workouts and 
other features that the console offers.

To use the manual mode, 

see page 21.

 To use a 

map workout, 

see page 22.

 To use a draw your own 

map workout, 

see page 23. 

To use a distance or 

time workout, 

see page 24. 

To view or change console settings, 

see page 25. 

To connect to a wireless network, 

see page 26.

 

To use the sound system, 

see page 27. 

To adjust 

the cushion, 

see page 27. 

IMPORTANT: If there are sheets of plastic on the 
console, remove the plastic. To prevent damage 
to the walking platform, wear clean athletic shoes 
while using the treadmill. The first time you use 
the treadmill, observe the alignment of the walking 
belt, and center the walking belt if necessary (see 
page 31).

Summary of Contents for NordicTrack Commercial 1750









































Reviews: