25
5.
Disconnect your tablet from the console if
desired.
To disconnect your tablet from the console, first
select the disconnect option in the iFit app. Then,
press and hold the iFit Sync button on the console
until the LED on the console turns solid green.
Note: All Bluetooth connections between the con-
sole and other devices (including any tablets, heart
rate monitors, and so forth) will be disconnected.
HOW TO CONNECT YOUR HEART RATE MONITOR
TO THE CONSOLE
The console is compatible with all Bluetooth Smart
heart rate monitors.
To connect your Bluetooth Smart heart rate monitor to
the console, press the iFit Sync button on the console;
the console pairing number will appear in the display.
When a connection is established, the LED on the
console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFit Sync button on the console until
the LED on the console turns solid green.
Note: All Bluetooth connections between the console
and other devices (including any tablets, heart rate
monitors, and so forth) will be disconnected.
HOW TO CHANGE CONSOLE SETTINGS
1.
Select the settings mode.
If you are using the manual mode or an onboard
workout, you must stop pedaling and exit the work-
out before you can select the settings mode.
To select the settings mode, press the Settings
button. The first settings screen will appear in the
display.
2.
Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Next Display button repeatedly to select the
desired settings screen.
3.
Change settings as desired.
Software Version Number
—The software version
number will appear in the display.
Calibration
—If the incline system needs to be
calibrated, press the Ramp increase or decrease
button. The ramp will automatically rise to the maxi-
mum incline level and then return to the starting
position. This will calibrate the incline system.
Unit of Measurement
—The currently selected
unit of measurement will appear in the display. The
console can show speed and distance in standard
or metric units of measurement. To change the unit
of measurement, press the St/Met button repeat-
edly. To view workout information in standard units,
select STD. To view workout information in metric
units, select MET.
