2
Operating Manual
Thank you for purchasing this Icon Fires product. Icon Fires places the highest priority on safety
of its products. Every care has been taken in designing, manufacturing and assembling your
Icon Fires Burner to ensure it operates effectively, efficiently and safely. Live-fire products must
be treated with care. We ask that you exercise care when using this product and follow the
instructions below. Before using your Icon Fires Burner, please read all the information
contained in this Operation Manual carefully. Icon Fires cannot be held responsible for any
damage or injury caused if these instructions are not followed.
Retain this Manual for future reference
.
IMPORTANT SAFEGUARDS
When using this Fireplace, basic precautions should always be followed, including but not
limited to the following.
Read all instructions and warnings before using this Fireplace.
WARNING
•
DO NOT OVERFILL THE BURNER
’S INTENDED CAPACITY.
•
USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED.
•
DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING.
•
PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES.
•
DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER.
•
DO NOT INSTALL INTO AN AREA WHERE THERE IS A DRAFT WHICH CAN AFFECT THE
FLAME.
•
NEVER POSITION THE BURNER WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE
MOVED/BUMPED BY ACCIDENT OR BLOWN BY THE WIND. E.G. CURTAINS, BLANKETS,
PAPERS ETC...
•
ONLY USE THE SLIMLINE BURNER IN AREAS WITH GOOD VENTILATION.
•
DO NOT COVER THE SLIMLINE BURNER VENT WITH ANY DECORATIVE ITEMS WHETHER
THEY ARE COMBUSTIBLE OR NON-COMBUSTIBLE, INCLUDING BUT NOT LIMITED TO
ARTIFICIAL LOGS, STONES, PEBBLES, GLASS BEADS etc.
•
CUSTOMS INSTALLATION: ICON FIRES IS NOT LIABLE FOR ANY INJURIES OR DAMAGES
SUSTAINED BY CUSTOM MADE OR PRIVATELY COMISSIONED FIREBOXES. ICON FIRES
RECOMMENDS USING THE BURNERS IN THE FIREBOXES MANUFACTURED BY ICON
FIRES ONLY. ANY ALTERATIONS TO THE ICON PRODUCT VOIDS ANY WARRANTY OR
LIABILITY.
CAUTION
•
Make sure you have read and understood this Manual before using this product.
•
Do not overfill or spill fuel when refilling.
•
If fuel is spilled, wipe with a dry cloth and allow the rest to evaporate before introducing
a flame to the Burner.
•
If the Burner is accidentally overfilled, follow the steps given in these next pages.
•
To refill, wait until the Burner is at the room temperature after the flame has been
turned off.
NOTE: the flame may not be visible to the naked eye in daylight and must be cool before filling.
•
Never refill over or near an open flame.
•
Use the supplied funnel or pump to refill.
•
Remove all plastic & packaging before using the Burner.
