ICON FIRES NERO User Manual Download Page 2

 

 

2

 

 

 

Operating Manual

 

 

Thank you for purchasing this Icon Fires Burner. Icon Fires is very safety conscious and we have taken 

every care in designing, manufacturing and assembling your Icon Fires Burner to ensure it operates 

effectively, efficiently and safely. In return we ask that you exercise care when using this product 

and follow the instructions below. Before using your Icon Fires Burner, please read all the information 

contained in this operation manual carefully. Icon Fires cannot be held responsible for any damage 

or injury caused if these instructions are not followed. 

IMPORTANT SAFEGUARDS

 

 

 When using this Fireplace, basic precautions should always be followed, including but not limited 

to the following. 

Read all instructions and warnings before using this Fireplace. 

 

WARNING  

• 

DO NOT OVERFILL THE BURNER’S INTENDED CAPACITY. 

 

• 

NEVER LEAVE THE APPLIANCE UNATTENDED DURING OPERATION OR WHEN A FLAME IS PRESENT. 

• 

DO NOT IGNITE THE COMBUSTION CHAMBER WHEN IT IS IN A HOT STATE.  

• 

USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED. 

 

• 

DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING. 

 

• 

PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES. 

 

• 

DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER. 

 

• 

UNLESS THE BURNER IS OUTDOORS, DO NOT INSTALL INTO AN AREA WHERE THERE IS A DRAFT WHICH 
CAN AFFECT THE FLAME.  
ESPECIALLY WHEN INSTALLING IN OLD HEARTHS, MAKE SURE HEARTH IS SEALED. 

• 

NEVER POSITION THE BURNER WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE MOVED/BUMPED 
BY ACCIDENT OR BLOWN BY THE WIND. E.G. CURTAINS, BLANKETS, PAPERS ETC...  

• 

ONLY USE THE SLIMLINE BURNER IN AREAS WITH GOOD VENTILATION.  

• 

DO NOT COVER THE SLIMLINE BURNER VENT WITH ANY DECORATIVE ITEMS WHETHER THEY ARE 
COMBUSTIBLE OR NON-COMBUSTIBLE, INCLUDING BUT NOT LIMITED TO ARTIFICIAL LOGS, STONES, 
PEBBLES, GLASS BEADS etc.   

• 

CUSTOMS INSTALLATION: ICON FIRES IS NOT LIABLE FOR ANY INJURIES OR DAMAGES SUSTAINED BY 
CUSTOM MADE OR PRIVATELY COMISSIONED FIREBOXES. ICON FIRES RECOMMENDS USING THE 
BURNERS IN THE FIREBOXES MANUFACTURED BY ICON FIRES ONLY. ANY ALTERATIONS TO THE ICON 
PRODUCT VOIDS ANY WARRANTY OR LIABILITY. 

• 

WARNING: FILLING AND ALCOHOL FUELLED DEVICE WHILE LIT HAS CAUSED SEVERE BURNS AND 
DEATHS. WHEN REFILLING FIRST CHECK THE FLAME IS EXTINGUESHED AND THAT THE DEVICE IS COOL. 

• 

DO NOT INSTALL THE FRAME ONTO COMBUSTIBLE MATERIAL SUCH AS WOODEN WALLS AND OTHER 
FLAMMABLE MATERIALS. 

CAUTION  

• 

Make sure you have read and understood this manual before using this product. 

 

• 

Do not overfill or spill fuel when refilling. 

 

• 

If fuel is spilt onto the surface of the Firebox 

WIPE IT IMMEDIATELY AND LEAVE TO DRY BEFORE LIGHTING THE 

BURNER.

 

• 

If fuel is spilled on the stainless steel Burner during filling, wipe with a dry cloth and allow the rest to 
evaporate before lighting the Burner. 

• 

If the Burner is accidentally overfilled, follow the steps in the Burner manual to rectify. 

• 

To refill, wait until the Burner is at the room temperature after the flame has been turned off.  

NOTE: the flame may not be visible to the naked eye in daylight and must be cool before filling.

 

• 

NEVER refill over or near an open flame and use a decanter with a flame arrestor only

 

• 

Remove all plastic & packaging before using the Burner.

 

 

Summary of Contents for NERO













Reviews: