iComfort SAU1220-H, User Manual

Page: 12 / 46

10
8. 4. flOOr, CAlf HEATEr ANd BENCH
1) floor and calf heater.
Put the floor heater on the sauna base. Slide the largest calf panel heater between the
guides of the front right lateral front panel and the rear right lateral panel until it touches
the floor panel. make sure the floor heater connection wire goes under the calf heater
panel notch. the heating elements of it should be directed outward (image 4). Screw the
floor panel heater with the provided screws. Use the pre-drilled holes at the four corner
of the panel.
image 4
2) Connectors
Connect the floor heater panel with the right rear lateral panel connector. then, connect
the connector of the large calf heater with the second rear right panel connector right to
the left of it.
make sure the wires are connected tightly; otherwise the heater will not work (image 5).
image 5