•
If the massage chair
fuse is burned out, please turn the chair off and unplug the power. You can open the lid
covering the fuse located in the switch box at the bottom of the chair in the back.
A) Unplug the AC connector of the chair
B) Insert a screw driver under the fuse symbol
C) Gently lift the cover and the fuse will come out at the same time
Use a same size and type of fuse to replace the old one and then cover the lid. You can call iComfort® at 1-866-967-7333
ext 227 if you need help or by email: [email protected]
CAUTION:
Never substitute a missing part with one of your own. If a part is missing, contact customer service at: 1-866-
967-7333 ext 227
Step 1:
Unpacking
1) Remove the box with the shoulder massage pads before removing the chair from the box.
2) Use one hand to hold the leg rest and the other hand to hold the steel tube attached to the backrest. (See
Illustration)
3) Carefully hold the leg rest and rolling upper tube then lift the main body of the chair from the carton and all
other materials including the pad, pillow, seat cushion, remote control, remote control holder and the support
power cord.
4) Gently take out the left and right armrest box.
Step 2: Lifting up the backrest
1. Connect the provided AC power cord to the control box at the back of the chair.
2. Connect the chair to an AC wall outlet.
3. Press on the main power switch on the control box. The backrest will go up and the leg rest down.
4. Press on the main power switch on the control box to deactivate the chair. And disconnect the power cord
from the AC wall outlet.
