11
9. Connecting to a PC
■
Connect to all kind of PC’s with a USB port supported using AU13
Plug AU13 to PC
Indicator LED of AU13
Set up headset for
pairing mode
USB port in PC
INITIAL PAIRING : Connecting
icombi™ AH20 to icombi AU13 for the first time
1)
During the connection process, the headset LED blinks in both red and blue and the LED of AU13
blinks in blue at an interval of 0.5 seconds.
2)
Both the LED’s of the headset and the AU13 blink in blue slowly at a longer interval of time, when the
wireless audio connection between the two devices is successfully made.
3)
RE-CONNECTING
: Do not go through the
INITIAL PAIRING
again. Simply slide on the headset in
order to re-connect with the AU13 plugged into a PC. Re-connection will be made automatically to
the AU13, that was paired with a icombi AH20 headset, after a short period time.
[note] AU13 is not compatible with Mac O/S PC.
