Icom VE-PG4, Operating Manual, Page: 401 / 423

15
MANAGEMENT
15-3
■
USB
Settings for USB flash drives that will be connected to the USB ports.
Management > Management Tools
Management Tools screen
1
2
3
4
1
USB Flash Drive ����� Select “Enable” to use a USB flash drive. (Default: Enable)
L
If you use the Automatic firmware update function, or Automatic Setting Load
function, select “Enable.”
2
USB Access Permission � Select the USB flash drive access option.
(Default:
M ✔
Firmware Update
M ✔
Settings Backup/Restore)
• Firmware Update (p.15-22)
• Settings Backup/Restore (p.15-19)
3
USB Authentication Key � Enter a USB Authentication Key of up to 64 characters to import to and
export from the USB flash drive .
L
This Key can restrict access to the Firmware Update function and Settings
Backup/Restore function.
L
After entering the
characters, click <Apply> in the Management Tools.
L
If you set the USB Authentication Key, the RoIP Gateway can verify the USB
authentication key written in the USB flash drive.